web analytics

Free Share The Newest Microsoft MCTS Exam Questions And Answers From PassLeader

(New Updated) Free Download Microsoft 70-246 182q Exam PDF Dumps With New Changed Questions (41-60)

How To Prepare The Exam 70-246 and To 100 Percent Pass It Without Any Problem? As far as I know that the latest 70-246 exam was updated with a lot of new exam questions, old version 70-246 exam dumps are not valid at all, you should get the newest 70-246 182q practice tests or brain dumps to prepare it. Now, one of the famous IT Certification Study Guide Supplyers — PassLeader just published the new 70-246 practice tests with PDF dumps and VCE test software, which have been corrected with many new questions and will help you passing exam easily. Visit www.passleader.com/70-246.html now and get the premium 70-246 182q exam dumps with new version VCE Player for free download.

QUESTION 41
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. An administrator installs a new tape drive on a server that has Data Protection Manager (DPM) installed. You discover that the tape drive is unavailable from the DPM Administrator console. You verify that the tape drive is installed correctly on the DPM server. You need to ensure that the tape drive is available from the DPM Administrator console. What should you do from the DPM Administrator console?

A.    From the Agents view, click Install.
B.    From the Disks tab, click Add.
C.    From the Protection view, click Tape.
D.    From the Libraries view, click Rescan.

Answer: D
Explanation:
To configure tape libraries:
In DPM Administrator Console, on the navigation bar click Management, and then click the Libraries tab.
In the Actions pane, click Rescan.
The Rescan operation might take several minutes to complete. DPM will add any library jobs to the queue that began during the Rescan operation. If a library job is already in progress when the Rescan operation begins, the Rescan operation will fail.
Configuring Tape Libraries: http://technet.microsoft.com/en-us/library/ff399665.aspx

QUESTION 42
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. You install the servers shown in the following table.
421_thumb[3]
The company’s compliance department identifies the following tasks that must be performed:
– Back up individual files from VM1.
– Back up the configuration settings of VM1.
– Restore the configuration settings of VM1.
– Restore individual files from VM1 to an alternate location.
The compliance department administrators recommend installing the DPM agent on Server1, and then performing a full backup. You need to identify which task is NOT met by the recommended solution. Which task should you identify?

A.    Restore individual files from VM1 to an alternate location.
B.    Restore the configuration settings of VM1.
C.    Back up the configuration settings of VM1.
D.    Back up individual files from VM1.

Answer: B
Explanation:
In the event of disaster recovery, System Center Data Protection Manager (DPM) 2010 allows you to recover virtual machines as files to a network folder. You can then copy those files to an alternate Hyper-V host server. However, to start a virtual machine on an alternate Hyper-V host server, you have to manually create and configure the virtual machine using the recovered files. DPM 2010 supports alternate location recovery (ALR), which allows you to recover a Hyper-V virtual machine to an alternate stand-alone Hyper-V host or to a cluster. The recovered virtual machine is already registered and configured on an alternate Hyper-V host server.
http://technet.microsoft.com/en-us/library/ff634209.aspx
In a virtualized environment the issue is whether to backup from inside the guest or from the host. The latter provides “bare metal restore” of an entire VM where something’s gone catastrophically wrong with a VM (or the host) but in general it doesn’t provide granular restore of files / folders. DPM 2010 added Item Level Restore (ILR), allowing you to restore individual files or folders within a VM even though it had only been backed up from the host. But this capability was only available when DPM 2010 ran on physical hardware, if the DPM server itself was in a VM this capability was not available. DPM 2012 fixes this glitch and can now do ILR even when the DPM server is a VM.
http://4sysops.com/archives/dpm-2012-part-3-other-improvements/

QUESTION 43
Your company has a datacenter in Los Angeles. The datacenter contains a private cloud that is managed by a System Center 2012 Virtual Machine Manager (VMM) infrastructure. The infrastructure contains two management servers and 10 Hyper-V hosts. You configure VMM to use an update server and to synchronize the updates by using a windows Server Update Services (WSUS) server named WSUS1. You attempt to verify compliance with the Sample Baseline for Security Updates. You view the console as shown in the exhibit. (Click the Exhibit button.)
431_thumb[1]
You need to ensure that you can verify compliance for all of the Hyper-V hosts. What should you modify?

A.    the update classifications of the update server
B.    the Assignment Scope of the baseline
C.    the default configuration provider
D.    the Network settings of the All Hosts host group

Answer: B
Explanation:
In the VMM console, open the Fabric workspace. On the Home tab, in the Add group, click Add Resources, and then click Update Server. The Add Windows Server Update Services Server dialog box opens. In Computer name, enter the fully qualified domain name (FQDN) of the WSUS server (for example, VMMServer01.contoso.com). Specify which TCP/IP port that the WSUS website listens on for connections (for example, port 8530). Enter credentials for connecting to the WSUS server. The account must have administrator rights on the WSUS server. If necessary, select the Use Secure Socket Layer (SSL) to communicate with the WSUS server and client’s check box. Click Add. The WSUS server will be added to VMM, followed by initial synchronization of the updates catalog. Depending on how many update classifications and products you chose when you installed the WSUS server, this operation can take a long time, depending on such factors as network traffic and the load on the WSUS server. To find out the status of the operation, monitor the status of the Add Update Server and Synchronize Update Server jobs in the Jobs window or in the Jobs workspace.
Note: After you enable update management in VMM, you should manage the WSUS server only through VMM, unless you are using a WSUS server in a Configuration Manager environment. To verify that the WSUS server was added to VMM successfully: In the Fabric workspace, on the Fabric pane, expand Servers, and click Update Server. The results pane should display the WSUS server. In the Library workspace, on the Library pane, expand Update Catalog and Baselines, and then click Update Catalog. The results pane should display the updates that were downloaded during WSUS synchronization.

QUESTION 44
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. The network contains seven servers. The servers are configured as shown in the following table.
441_thumb[1]
You need to recommend a solution to apply Windows updates to the virtualization hosts. The solution must meet the following requirements:
– Approve Windows updates from the VMM Administrator Console.
– Store information about Windows update installations in Configuration Manager reports.
What should you do first?

A.    From the VMM Administrator Console, add Server6 as a host server, and then install the Configuration Manager agent on Server1.
B.    From the VMM Administrator Console, add Servers as an update server, and then install the Configuration Manager agent on all of the visualization hosts.
C.    On Server7, install Windows Server Update Services (WSUS), and then install the Configuration Manager agent on Server1.
D.    On Server7, install Windows Server Update Services (WSUS), and then install the Configuration Manager agent on all of the visualization hosts.

Answer: B
Explanation:
The requirements need a WSUS server. Server 7 is the most appropriate server to install WSUS. A configuration manager agent is required to store information about Windows update installation in the Configuration Manager reports.
http://technet.microsoft.com/en-us/library/gg712312.aspx

QUESTION 45
Your company has a datacenter in Los Angeles that contains a private cloud. The private cloud is managed by using a System Center 2012 Operations Manager infrastructure. You plan to create a distributed application named Appl. You need to ensure that a folder for App1 is available from the Monitoring workspace in the Operations Manager console. What should you do?

A.    Run the Protect-SCOMManagementPack cmdlet.
B.    Save App1 in the Default Management Pack.
C.    Run the Import-SCOMManagementPack cmdlet.
D.    Save App1 as a new management pack.

Answer: D
Explanation:
The Default Management Pack file contains common elements such as views at the top level of the Monitoring workspace. This is an unsealed management pack file so that you can create views and folders at this level. It should not be used for any other purpose. For creating elements such as monitors and rules, create a new management pack file.
Selecting a Management Pack File: http://technet.microsoft.com/en-us/library/hh457560.aspx
The Default management pack that ships with OpsMgr 2007 is used to store very specific information for the management group. It is a widely known best practice to NOT write any custom rules, monitors, groups, views, or overrides to this MP. Even customers who know this – and try to enforce this across their organizations…. will still inadvertently get junk in their default MP…. they will save things here by accident, or by granting access to advanced operators who aren’t educated on this topic. The main problem with doing so…. is that we will build a dependency for this MP on any MP it references…. and therefore we wont ever be able to delete those management packs, until we clean this Default MP up, and start enforcing best practices.
http://blogs.technet.com/b/kevinholman/archive/2008/11/11/cleaning-up-the-default-mp.aspx

QUESTION 46
Your company has a private cloud that is managed by using a System Center 2012 Operations Manager infrastructure. From Operations Manager, you create a group named Group1. You add multiple servers to Group1. You have an Active Directory group named Group2. You configure a dashboard for the users in Group2 to manage the client computers in Group1. You need to ensure that the users in Group2 can achieve the following tasks:
– View open critical alerts generated by Group1.
– Identify whether a monitor generated an alert.
Which object should you add to the dashboard?

A.    a state widget
B.    an alert widget
C.    an event view
D.    a state view
E.    an alert view

Answer: B
Explanation:
Adding an alert widget to a dashboard:
Step 1: In an empty dashboard cell, click on the “Click to add widget” link. This opens the New Dashboard and Widget Wizard.
Step 2: Now you are presented with a selection of the available widgets. Select Alert Widgets and then click Next.
Step 3: Once you give your widget a name and a description, you can choose a group or object for which to display alerts. The ability to select between “Groups” and “Groups and objects” allows you to change the scope of objects for which you will receive alerts. If you only want to target a certain object within a group or class, the “Groups and objects” option allows you to do so, while the “Groups” option enables you to view alerts for all objects within the group you choose.
Step 4: Next you can specify the criteria for the alerts you will receive. You may choose the Severity, Priority, and Resolution State of the alerts. For example, I will receive alerts for warnings and information of all priority, and in either the new or closed state.
Step 5: Lastly, select the columns to display for each alert. You can also decide how the alerts are sorted by default as well as how they are grouped.
One great addition to the alert widget that is not present in the alert view is the addition of the “Is Monitor Alert” column. This column allows you to see whether the alert was generated by monitor rather than a rule. In my example, I will group alerts by “Is Monitor Alert” and sort by “Last Modified”. And there you have it. We’ve configured a dashboard with a powerful alert widget. It is a great way to quickly view the alerts you care about organized in the way you want. If you aren’t satisfied with your configuration or if your needs change, you can always click the button which gives you the option to reconfigure, personalize, or remove your widget. Reconfiguring a widget opens a wizard with your previously chosen widget configuration and allows you to change all of options to keep up to date with your needs. Here you can change everything from the groups or objects targeted, to the name of the widget. Personalizing a widget allows you to change the display options for that widget. Here you can change which columns are displayed and how your alerts are grouped and sorted. This allows you to view the alerts within a context that is most appropriate to you, but without having to worry about the primary configuration details.
http://blogs.technet.com/b/momteam/archive/2011/10/17/operations-manager-2012-dashboards-the-alertwidget.aspx

QUESTION 47
You deploy System Center 2012 Operations Manager. You create two unsealed management packs named MP1 and MP2. You create an override for MP1. You create a group in MP2. You need to apply the override for MP1 to the group in MP2. What should you do before you apply the override?

A.    Create a new class in MP2.
B.    Seal MP1.
C.    Seal MP2.
D.    Create a new class in MP1.

Answer: C
Explanation:
When you create a group, you save it to an unsealed management pack. However, an element in an unsealed management pack, such as a group, cannot reference an element in a different unsealed management pack, such as an override or a view. If you are going to use a group to target an override or scope a view, you must either save the group to the same unsealed management pack as the override or view, or you must seal the management pack that contains the group. If you save the group to the same unsealed management pack as the override or view, you can only use that group for overrides and views that are also contained in that unsealed management pack. If you seal the management pack that contains the group, you can reference that group from other unsealed management packs. However, you cannot easily change any group settings in the sealed management pack or add new groups to the sealed management pack.
http://www.code4ward.net/main/Blog/tabid/70/EntryId/130/Implications-when-using-groups-from-a-sealed-MPfor-overrides.aspx

QUESTION 48
Your company has a datacenter in Los Angeles. The datacenter contains a private cloud that is managed by using a System Center 2012 infrastructure. A server named VMM1 hosts the System Center 2012 Service Manager management server. A server named Server2 hosts the System Center 2012 Orchestrator management server. You plan to use a runbook named Book1 to update the status of Service Manager incidents. You need to ensure that you can create Book1, and then reference the runbook in Service Manager. What should you do? (Each correct answer presents part of the solution. Choose all that apply.)

A.    From the Service Manager Console, add an incident event workflow.
B.    From the Service Manager Shell, run the Set-SCDWJobSchedule cmdlet.
C.    From the Orchestrator Deployment Manager, register the Integration Pack for System Center Service Manager.
D.    From the Service Manager Console, create an Orchestrator connector.
E.    From the System Center 2012 Orchestrator Runbook designer, create a connection.
F.    From the Service Manager Shell, run the Enable-SCDWJobSchedule cmdlet.

Answer: CDE

QUESTION 49
Your company has a private cloud that contains a System Center 2012 infrastructure. The network contains a Service Manager infrastructure and an Orchestrator infrastructure. You plan to configure the private cloud to meet the following requirements:
– Integrate runbooks to Service Manager requests.
– Automate administration tasks by using runbooks.
– Provide end users with the ability to perform administrative tasks.
You need to configure the private cloud to meet the requirements. What should you do from Service Manager?

A.    Register the Orchestrator Integration Packs.
B.    Create an Exception Management Workflow.
C.    Register a data source.
D.    Select the sync folder for the Orchestrator connector.

Answer: D
Explanation:
After importing into Orchestrator and setting up connections, you need to sync from Service Manager (make the run books available).

QUESTION 50
Drag and Drop Questions
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. The network contains an Orchestrator infrastructure and a Service Manager infrastructure. You need to automate user account provisioning for the Self-Service Portal. The solution must ensure that new user accounts are approved by a member of the human resources department. You configure the Orchestrator connector. Which five actions should you perform next? (To answer, move the appropriate actions from the list of actions to the answer area.)
501_thumb[1]

Answer:
502_thumb[1]
Explanation:
http://syscen.blogspot.com/2012/01/automating-new-user-creation-with-scsm.html
http://syscen.blogspot.com/2012/02/automating-new-user-creation-with-scsm.html
http://syscen.blogspot.com/2012/02/automating-new-user-creation-with-scsm_09.html
http://syscen.blogspot.com/2012/02/automating-new-user-creation-with-scsm_15.html
1. Create Runbook Automated Activity Template.
2. Extend service request class.
3. Create Service Request template using the new Class and include the Runbook Automated Activity Template.
4. Create the Service Request Offering.


http://www.passleader.com/70-246.html

QUESTION 51
Hotspot Questions
Your company help desk uses System Center 2012 Service Manager to manage and track problems. You need to ensure that the manager of the help desk is notified automatically when a high-priority incident is updated. What should you configure? To answer, select the appropriate configuration in the answer area.
511_thumb[1]

Answer:
512_thumb[1]
Explanation:
http://technet.microsoft.com/en-us/library/ff460891.aspx
Before notifications are sent, first configure each notification channel, such as the settings for Simple Mail Transfer Protocol (SMTP). Notification messages are sent based on a notification template. Therefore, you will need to create a notification template. You can then use the Notification Subscription wizard to subscribe a group of users to a notification that will be sent whenever the changes that you specify occur. Finally, you can verify that a notification is sent by manually generating the change.

QUESTION 52
Your company has a private cloud that contains a System Center 2012 infrastructure. The network contains a Service Manager infrastructure and a Configuration Manager infrastructure. You create a configuration baseline for desired configuration management. You need to ensure that an incident is created automatically in Service Manager when a device is non-compliant. You install the Configuration Manager connector for Service Manager. What should you do next?

A.    Create a Desired Configuration Management Event Workflow Configuration.
B.    Create a service level objective (SLO) for the desired configuration management incident.
C.    Create an incident template.
D.    Import the Configuration Manager Management Packs.

Answer: A
Explanation:
A connector is required to bring data from Configuration Manager into Service Manager. From there, you create a Desired Configuration management Event Workflow.
Using Connectors to Import Data into System Center 2012 – Service Manager: http://technet.microsoft.com/en-us/library/hh524326.aspx
How to Configure Desired Configuration Management to Generate Incidents: http://technet.microsoft.com/en-us/library/hh495577.aspx
Gol: http://technet.microsoft.com/en-us/library/ff460938
In System Center Service Manager 2010 Service Pack 1 (SP1), you can import configuration baselines from System Center Configuration Manager 2007 by using a Configuration Manager connector. Then, you can configure Service Manager to create incidents for each Service Manager configuration item that is reported as noncompliant against the defined values. You can use the following procedures to configure incident management to automatically generate desired configuration management-based incidents. To configure incident management to automatically generate desired configuration management based incidents
1. In the Service Manager console, click Administration.
2. In the Administration pane, expand Workflows, and then click Configuration.
3. In the Configuration pane, double-click Desired Configuration Management Event Workflow Configuration.
4. In the Configure Desired Configuration Management Workflows dialog box, click Add.
http://technet.microsoft.com/en-us/library/ff460938.aspx

QUESTION 53
Hotspot Question
You have a System Center 2012 R2 infrastructure that contains three servers. The servers are configured as shown in the following table.
531_thumb[2]
You need to create a self-service request offering that will allow users to provision new virtual machines. On which server should you perform each of the following actions? To answer, select the appropriate server for each action in the answer area.
532_thumb[2]

Answer:
533_thumb[1]

QUESTION 54
Your company has a private cloud that is managed by using a System Center 2012 Operations Manager infra structure. You have a line-of-business web application named App1. App1 stores its information in a dedicated Microsoft SQL Server 2008 database. You need to create a central diagram that contains the complete health information of Appl. You import the SQL, IIS, and Windows Server management packs. What should you create next?

A.    a dashboard view
B.    a distributed application model
C.    a Service Level Dashboard
D.    a diagram view

Answer: B
Explanation:
You need to create a distributed application first to be able to create the service level dashboard. First a DA, followed by a service level objective, and finally a Service Level Dashboard.
http://technet.microsoft.com/en-us/library/hh212692.aspx
http://technet.microsoft.com/en-us/library/hh230719.aspx

QUESTION 55
Drag and Drop Questions
Your company has a private cloud that is managed by using a System Center 2012 Operations Manager infrastructure. You need to ensure that members of a group named Group1 can resolve printing alerts by using the Operations Manager console. The solution must minimize the number of Operations Manager permissions assigned to Group1. Which three actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
551_thumb[1]

Answer:
552_thumb[1]
Explanation:
1. Import the Windows Server Print Server Management Pack – Required for monitoring printing
http://technet.microsoft.com/en-us/library/cc181012.aspx
2. Create an Operator User Role – Required to add Group1 to SCOM
3. Scope the User Role – To set this role to access print alerts only
No – Create an event viewer alert, technically feasible to set logging of print queues and then monitor events but Microsoft always asked for the BEST solution, hence the Print MP
No – Create a Subscription, there is no mention of notifications in the question
No – Create a run as account, the question says resolve the print ALERT not the fault itself

QUESTION 56
Your company has a datacenter in Los Angeles that contains a System Center 2012 Operations Manager infrastructure. You create three unsealed management packs named Pack1, Pack2, and Pack3. You create an override for Pack1. You create a group in Pack2. You need to apply the override for Pack1 to the group in Pack2. What should you do before you apply the override?

A.    Seal Pack1.
B.    Create a new class in Pack3.
C.    Create a new class in Pack1.
D.    Seal Pack2.
E.    Create a new class in Pack2.

Answer: D
Explanation:
When you create a group, you save it to an unsealed management pack. However, an element in an unsealed management pack, such as a group, cannot reference an element in a different unsealed management pack, such as an override or a view. If you are going to use a group to target an override or scope a view, you must either save the group to the same unsealed management pack as the override or view, or you must seal the management pack that contains the group. If you save the group to the same unsealed management pack as the override or view, you can only use that group for overrides and views that are also contained in that unsealed management pack. If you seal the management pack that contains the group, you can reference that group from other unsealed management packs. However, you cannot easily change any group settings in the sealed management pack or add new groups to the sealed management pack.
http://www.code4ward.net/main/Blog/tabid/70/EntryId/130/Implications-when-using-groups-from-a-sealed-MPfor-overrides.aspx

QUESTION 57
Hotspot Questions
Your company has a private cloud that contains a System Center 2012 Service Manager infrastructure. The help desk uses Service Manager to manage and track incidents. Service desk analysts report that they receive many Windows 7-related incidents. You need to create a classification for the Windows 7-related incidents. What should you configure to create the classification? To answer, select the appropriate configuration in the answer area.
571_thumb[1]

Answer:
572_thumb[1]
Explanation:
https://www.youtube.com/watch?v=QRWRKL6zA5k
http://social.technet.microsoft.com/Forums/systemcenter/en-US/3c092cb3-734e-4fa3-ba7a-5b5fc9966651/scsm-2012-sorting-of-incident-classification

QUESTION 58
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. You discover that several users create incidents for the same issue by using the Self-Service Portal. Over 100 incidents are created. You need to ensure that all of the incidents can be resolved as quickly as possible. What should you do?

A.    create a service level objective (SLO).
B.    Create a queue.
C.    Select the Link to New Parent Incident task.
D.    Select the Escalate or Transfer the Incidents task.

Answer: C
Explanation:
http://wwwco1vip.microsoft.com/downloads/en/details.aspx?FamilyID=01f0792d-f246-4549-a200-53001865495b
How to Create a Parent Incident from an Incident Form:
In SystemCenter2012-ServiceManager, one way a help desk analyst can create a parent incident is when an existing incident is already opened. You can create a parent incident using the following steps. A parent incident serves as a container for several incidents. The following procedure is performed on an incident that is neither a parent incident nor a child incident. Afterward, a new parent incident is created and the existing incident is converted to a child incident. To create a parent incident from an incident form:
1. In the Service Manager console, open the Work Items workspace, and in the Work Items pane, expand Incidents.
2. Select any Incident Management view that contains active incidents, and then select an incident.
3. In the Tasks pane, click Edit to open the incident.
4. In the Tasks pane, click Link to New Parent Incident to open the Link to New Parent Incident dialog box.
5. In the Link to New Parent Incident dialog box, select a template to create the new parent incident with, and then click OK. For example, select Networking Issue Incident Template, and then click OK.
6. In the Title box, type a new description or modify the description that is inserted by the template. For example, type Network Outage in Bldg 773.
7. In the Affected user box, select the user who reported this incident. For example, select Joe Andreshak.
8. In the Alternate Contact Method box, enter additional contact information for the affected user (optional).
9. The Child Incidents tab appears in the form where you view the child incident that the new parent incident is grouped with and where you can add other child incidents.
10. In the parent incident form, click OK to close it.
11. In the original incident form, click OK to close it.

QUESTION 59
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. The network contains an Operations Manager infrastructure and a Virtual Machine Manager (VMM) infrastructure. You implement a Microsoft SharePoint Server 2010 farm that is hosted on 10 virtual machines. The company defines a service level agreement (SLA) for the farm’s availability of at least 99.9 percent uptime. You need to ensure that the company’s compliance officer can identify whether the SLA requirement is met. What should you do?

A.    Create a distributed application that contains the servers and the services used by the farm.
Create a Service Level Tracking object for the distributed application.
Add a service level objective (SIO), and then set the goal to 99.9 percent.
B.    Create a group, and then add all of the farm servers to the group.
Create a Service Level Tracking object.
Add a service level objective (SLO), and then set the goal to 99.9 percent.
C.    Create a group, and then add all of the farm servers to the group.
Create a performance collection rule for each front-end Web server m the farm.
Configure an alert if network availability falls below 99.9 percent.
D.    Create a distributed application that contains the servers and the services used by the farm.
Create a performance collection rule for each front-end Web server in the farm.
Configure an alert if network availability falls below 99.9 percent.

Answer: A
Explanation:
Adding only the servers doesn’t mean, that the services (SharePoint) are available. So it must be a distributed application.
http://technet.microsoft.com/en-us/library/hh230719
http://technet.microsoft.com/en-us/library/hh457612.aspx

QUESTION 60
Your company has a private cloud that contains a System Center 2012 Service Manager infrastructure. You need to create a service level objective (SLO) for incidents that have a priority value of 1. What should you create first?

A.    a service template
B.    a queue
C.    a channel
D.    a rule

Answer: B
Explanation:
Queues are used in SCSM 2012 SLA Management to apply the SLA to a group of work items.
http://blogs.technet.com/b/servicemanager/archive/2012/01/25/scsm-2012-service-level-management.aspx


http://www.passleader.com/70-246.html